Hi,
I've used it with the 16F84 and it's great, thanks Tom!
I tried a quick build for a 16F627 and the build failed, I've not looked
into why.
There should be no difference between the "C" and "F" devices, as far as
this application is concerned. 

Robert G8RPI.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Rex
Sent: 04 August 2006 06:31
To: Tom Van Baak; Discussion of precise time and frequency measurement
Cc: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] How do I know my GPS stabilizedoscillatoris
working?

On Thu, 3 Aug 2006 18:30:33 -0700, "Tom Van Baak" <[EMAIL PROTECTED]>
wrote:

>> TVB-DIV is a frequency divider, designed by TVB, built by Brooke
Clarke.
>> Still in prototyping, but works pretty well.
>
>Quite a few people have used it over the years.
>The free source code is at:
>
>http://www.leapsecond.com/tools/ppsdiv.zip
>
>/tvb
>

Tom,

Thanks for the work and for sharing.

The listing says it's for a 16C84. I assume it would work fine with one
of the 16F84's or one of the newer chips, say 16F627. Do you know if
that is true? Anyone tried it? Nothing about the 16C version that's
better hardware-wise?

-Rex


_______________________________________________
time-nuts mailing list
[email protected]
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts 
Any opinions expressed in this email are those of the individual and not 
necessarily Genetix Ltd (Genetix) or any company associated with it. This email 
and any files transmitted with it are confidential and solely for the use of 
the intended recipient. If you are not the intended recipient or the person 
responsible for delivering to the intended recipient, be advised that you have 
received this email in error and that any use is strictly prohibited. If you 
have received this email in error please notify Genetix by telephone on +44 
(0)1425 624600.


The unauthorised use, disclosure, copying or alteration of this message is 
strictly forbidden. This mail and any attachments have been scanned for viruses 
prior to leaving the Genetix network. Genetix will not be liable for direct, 
special, indirect or consequential damages as a result of any virus being 
passed on, or arising from alteration of the contents of this message by a 
third party.

_______________________________________________
time-nuts mailing list
[email protected]
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

Reply via email to