Folks, We have a rubidium oscillator in a laboratory here that is ripe for calibration against a primary standard. We have installed a Datum 9390 GPS receiver next to it as well as an SR620 counter.
Can any of you recommend a good operating mode to make the SR620 reveal the rubidium drift rate in a reasonably short time a couple days is OK) so that we may adjust it to near zero? We have both 10 MHz and 1PPS available from both sources. We don't currently have a logging computer connected to the SR620, but we can do that if needed. _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
