Hello group. At least one question I can answer ! Both boards correspond to the A3 board for an HP 5328A counter. A3 is used for OCXO (option 10.)
Board 1 is the A3 board for military versions of the 5328A: the AN-USM 459. It has extra controls for voltage and fine frequency adjust (multiturn pot) Board 2 is the A3 board for the regular 5328A, it is described in the 05328-90011 PDF available from the Agilent website. It is supposed to drive a 10544A, but I have a 5328A with a 10811 connected to it and running OK. Hope this helps. -Marc- > I was hoping someone here could tell me the difference between these two > boards (aside from their physical dimensions are different - I can see > that). > I know they are used in conjunction with the HP 10544A / 10811 boards when > inside certain equipment. Is one just a newer revision? Is one better than > the other? I can find plenty of info on the oscillators, but zilch on the > adapter boards. > http://www.rabel.org/pics/10544A/Board_1.jpg > http://www.rabel.org/pics/10544A/Board_2.jpg --------------------------------------------------------------------------- ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
