Welcome! I'm new here too, but the people here are most helpful and friendly.
There are other guys here that can probably give you a lot better info, but until they reply I'll try to give my two bits from the info you gave. First about the static position. Since those units you said were at other sites, I would assume they would do a self-survey upon power up (and GPS fix) as opposed to requiring someone to manually program in the position. Also even if the location changed it should still be able to pickup the satellite signals. I'm not familiar with that GPS engine, I just looked it up on their site ( http://www.furunogps.com/GT8031_image.html ), neat little thing. It says acquisition from cold start in 44.9 seconds. Most GPSes I've seen will give a proprietary sentence upon power-up, stating the firmware version and other bits of info. However with it looping like that, maybe something is connected to it that shouldn't be, causing it to constantly do like a soft-reboot? Maybe you can find some info on the Furuno site about sending a reset or other command? Some GPSes I've seen (like the Motorola Oncore) start in a poll only mode, meaning it doesn't give any info until you send commands for it to do so. So it might just be giving that proprietary sentence once a second until you request other info? Jason _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
