Hi Stephan,
I have a surplus 100MHz Vectron OCXO from a Wavecrest DTS-2070
jitter-measurement system that was de-comissioned due to CPU memory failure.
The oscillator works great, and it was the main timebase in the $90K+ jitter
instrument, so I suspect it's the "best" OCXO they could buy at the time in
terms of jitter/phase noise.
It's a Vectron Model 224-8647-1, serial No. 1411054, a 24V unit.
It has seven solder tabs of which only two are used (24V power). I suspect
the others are for electronic trim, and oven monitoring etc wich were not used
in the Wavecrest.
It's a 100mm length, 50x50mm can with mechanical trim and SMA output.
Don't have any datasheet for it, maybe someone here has info? I would barter
it with you :) It works very well with 24V applied.
Let me know if you are interested in pictures etc.
thanks,
bye,
Said
_______________________________________________
time-nuts mailing list
[email protected]
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
