On Mon, 2007-01-01 at 21:47 +0000, Brendan Minish wrote: > 2/ the GPIO0 pin is the second pin in from the left on the bottom row as > seen with the board serial port facing you
before anyone kills a board I need to make this clearer! with the serial port facing you JP3 is as follows 2 4 6 8 10 12 14 1 3 5 7 9 11 13 pin3 (GPIO 0) is the one you want for ident purposes pin1 is 3.3V pin 2 is 5V pins 11,12,13 are signal GND which I used for PPS ground regards Brendan _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
