Have you checked your DIP switch settings? SW10 according to manual switches between RS-232 and 20mA current loop operation.
Have you tried contacting Meinberg? Their tech support is superb. Rob Kimberley -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rune Magnussen Sent: 11 January 2007 17:00 To: [email protected] Subject: [time-nuts] Meinberg DCF77 C51 - serial connection? I have just got a Meinberg DCF77 C51 radio clock and am trying to get it to work. I have adjusted the antenna and the clock is synced to the signal. However there seems to be no signal on the serial line at the PC. I have tried 'cat /dev/refclock-0' to see if there were data. The serial cable is from a modem (25/9-pin). Do I need another cable? If yes - what kind? There is a pin-layout in the manual but I cannot figure out what cable to use. Docs: http://www.meinberg.de/download/docs/manuals/english/c51.pdf Regards Rune _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
