The person "corbymite" on eBay might be able to help you: http://members.ebay.com/ws/eBayISAPI.dll?ViewUserPage&userid=corbymite
I'll have to dig through all my emails, I think I have it somewhere. But at the very least you can contact him through eBay. Jason > Can anyone give me advise with the following: > > I have a Cesium Frequency Standard FTS 4050, that I powered > up after it had > been stored for years. > It seams to work, but: > The beam current is way too high. > With monitor select on 3 (= beam current): the output on the > meter is >5V. > The lock is on and the output frequency is 9 999 999.2 Hz. > The other readouts are: > Setting Reading > 1 = QZ oven 3.5V > 2 = CS Oven 1.2V > 3 = Beam current >5V > 4 = Control voltage 2.4V > 5 = Supply voltage 2.8V > > Any information on this would be appreciated. > Thanks, > Michel _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
