I do not see an SMC connector on the auction item. Since it is an option on that model, it may not be there.
Dick, W1KSZ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Magnus Danielson Sent: Saturday, January 20, 2007 5:55 PM To: [email protected]; [EMAIL PROTECTED] Subject: Re: [time-nuts] HP Z3801A on eBay -- And check this out as well From: Dr Bruce Griffiths <[EMAIL PROTECTED]> Subject: Re: [time-nuts] HP Z3801A on eBay -- And check this out as well Date: Sun, 21 Jan 2007 11:17:14 +1300 Message-ID: <[EMAIL PROTECTED]> Dick and Bruce, > Richard W. Solomon wrote: > >> If you have more than one GPS engine connected, how does it disable > >> the +5 vdc on the other receivers ? Or do you need to disable the > >> Preamp DC feed ? > >> > >> Thanks, Dick, W1KSZ > >> > >> --- > Dick > > 58517A accepts dc power from port 1 only or from the dc input connector. > See Symmetricom data sheet > > http://ngn.symmetricom.com/pdf/datasheets/ds-gps-active-splitters.pdf Well, I failed to have my Z3801A drive my 58517A over port 1. Appling 5V on the SMC connector on the 58517A solved the problem. The same Z3801A was feeding the active antenna with no problem just a few minutes before, so it is not an issue on the Z3801A. So, I recommend you to feed it on the SMC. That works very well for my GPSes. Cheers, Magnus _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
