Thanks for the quick responses, Jim & Phil! No, I was running the XO unit all by itself. My guess is that the XO should be able to run all by itself??? I have previously run with the XO & the RB interconnected (J5 & 10 MHz Ref). Not for 24 hours, but at least over night, but No GPS stayed ON on both units, Fault was ON only on the XO.
Previously I have seen no activity on any pins of J6 on the XO, will check again & also check J6 on the RB unit. Maybe I really do have a serious fault?? Am I correct in assuming that the data continuously streams out of each J6 connector without any interrogation being sent from a PC?? Bob Martinson, N1VQR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Miller Sent: Tuesday, February 06, 2007 4:55 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Lucent RFTG-m-XO On Feb 6, 2007, at 11:27 AM, Robert E. Martinson wrote: > I'm about to conclude that I have a defective unit and will order > another unless anyone has any further suggestions (PLEASE)? Did you have the RB connected via the crossover cable and 10 MHz cable as described in previous emails? Jim _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
