I bought two of the HP 5334 on e-Pay and was pleasantly surprised when I found that one had the 1.2 GHz Pre-Scaler and HP 10811 Time Base in it. The other became an organ donor.
73, Dick, W1KSZ -----Original Message----- >From: David Dameron <[EMAIL PROTECTED]> >Sent: Mar 20, 2007 2:24 AM >To: [email protected] >Subject: [time-nuts] Frequency counter recommendations > >Hi all, >I have a run-of-the-mill frequency counter (8 digits, 0.1 and 1.0 sec gate, >no reference oscillator output or ext. input) and would like to upgrade to >something better. I would initially like to measure frequencies in the 10 >MHz or below range with a resolution of better than 0.1 Hz. >From reading this list have picked out a HP 5334 or a Racal-Dana 1991/1992. >Some of these have been recently on ebay, but that is not my preferred >source, the seller often does not state the options installed, as well as >the typical ebay problems. > >Are there others someone would recommend, used? >-Dave D. > > > > > >_______________________________________________ >time-nuts mailing list >[email protected] >https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
