Many businesses that sell glass also sell Plexiglass. ----- Original Message ----- From: "Bill Janssen" <[EMAIL PROTECTED]> To: "Discussion of precise time and frequency measurement" <[email protected]> Sent: Thursday, March 22, 2007 5:34 PM Subject: Re: [time-nuts] HP 5370A Frequency counter Problem(s)
> Jack Hudler wrote: >> On HP gear, I used a tire cleaner (Eagle something). >> It's the only thing I found that removes that cigarette tar stain >> Note: make sure any stickers and goo from stickers are gone before tire >> cleaner. >> > Anybody got a replacement for the Plastic that is in front of the > display. Mine is totaly GONE. > The instrument should work fine without it but it would be nice to have > it. I will probably > make something someday. > > Bill K7NOM >> Then I polish the face with rubbing compound or touch up areas with paint >> and coat with a urethane semi-gloss clear. >> >> I can restore a heavily damaged face (Scratched to the metal) to like new >> with a few hours work. (Curse those idiots that scrape of stickers!!) >> >> Jack >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >> Behalf Of John Miles >> Sent: Wednesday, March 21, 2007 8:50 PM >> To: Discussion of precise time and frequency measurement >> Subject: Re: [time-nuts] HP 5370A Frequency counter Problem(s) >> >> I just pull the board (it's fairly obvious how, but I believe the manual >> also talks about how to disassemble the front panel), take the sliders >> out >> of the switches, and swab everything down with Caig ProGold. >> >> The only tricky part is paying attention to how the springs are installed >> on >> the switch sliders. If you put them back the wrong way, you can bend or >> break the spring when you try to operate the switch. >> >> -- john, KE5FX >> >> >>> -----Original Message----- >>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>> Behalf Of jshank >>> Sent: Wednesday, March 21, 2007 6:30 PM >>> To: Discussion of precise time and frequency measurement >>> Subject: Re: [time-nuts] HP 5370A Frequency counter Problem(s) >>> >>> >>> Could someone please provide me with a link or the procedure to >>> disassemble, >>> cleaned / lubed. >>> Thanks >>> Jeff >>> >>> >> >> >> _______________________________________________ >> time-nuts mailing list >> [email protected] >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> >> >> _______________________________________________ >> time-nuts mailing list >> [email protected] >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> >> >> >> > > > > _______________________________________________ > time-nuts mailing list > [email protected] > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
