This is a long shot but I am hoping that someone might be able to give me some
Hints as to a problem that I am
having with a Used 151-601 XL-DC Receiver that I recently purchased. When I
first fired it up it showed a date of
1990 so I updated the Date to the current one using an "F" function and then
went through a 24 hour Auto Mode set up.
Once the receiver went into Time mode at the end of set up. I pushed the
Location button and noted A good Lat, Lon
and elevation had been established. The LCD was showing 3D for the most part
and 5 or 6 SAT PRN's. Looking at Osc
Stats I see Offsets ranging from the 10 -10 to 10 -12, Drift 10-08 to 10-09,
Phase 10-08 to 10-10 and DAC ranging very slowly
from 15950 up to 16400 or so. Now the bad news after days of operation when I
run an F73 "Show Faults I am still showing
GPS Unlocked, Position, Time Unknown (Even though a Lat, Lon had been
established and UTC had been added through
a Function command), and lastly a Time Error and Acquisition Error. I seem to
be acquiring the satellites but not decoding
their full message. I am not sure if this is due to a mistake I am making or a
receiver failure. Any suggestions
that anyone can give would be ever so greatly appreciated for I am at a loss
and so far my web searches have been
fruitless. Thank you all for your consideration in this..... Herb Belin [EMAIL
PROTECTED] or 413 530 0048
Sorry for the repeats on this but I guess I have to ad carrige returns
manually...
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
