I read with interest about the new 10 MHz distribution amplifier. But I agree with everyone, it's the specs that are missing that are important.
But I wanted to take one comment up about AGC. My company makes a nice distribution amplifier and we do have AGC. The nice thing here is that a +7 dBm input (e.g PRS10 output) will give you up to +13 dBm output. Despite the AGC we still achieve good phase noise (-135 dBc/Hz @ 1 Hz with a -168 dBc noise floor) together with 130 dB isolation and 10 ps/C phase stability. I suspect this low cost unit has a -140 or -150 dBc noise floor. But our unit costs a lot more than this low cost design, so maybe I'm not being fair in comparing. www.ptsyst.com/DA1-100-10-B.pdf has all our specifications. I could probably talk our sales manager in a once off big discount for time nuts readers, but I suspect it would still be out of the range of amateurs. Send me an email if you are interested ([EMAIL PROTECTED]) Martyn _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.