Ah, I do have the 2 resistors on the A15 - I do have the late model oven controller so my ionizer shoud be DC correct?
Now the only problem which remains is the sourcing of a spare tube - Scott On Tue, Sep 30, 2008 at 2:58 PM, corby d dawson <[EMAIL PROTECTED]> wrote: > Scott, > > I'm not sure how late a model you have but on the A15 board you should > see a place for two resistors that are connected on the board in > parallel. > > If you connect a high resitance decade resistor (start at 10Megs) across > one of the resistors. > > Now while monitoring the EM divided voltage reduce the decade resistor > until the EM test point increses to .25VDC. > > Now solder a 1% resistor of this value across the one of the other > existing resistors. > > Now you are set up for 2500VDC EM voltage. > > > Corby Dawson > ____________________________________________________________ > Click here to become a professional counselor in less time than you think. > http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3oJtoeZD8bdFl3HM6Qnrf4dkHES7UXgr2gqDl1I14G8tilHb/ > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
