HI Murray, got the same problem and found that the program looks as default COM1 port....... Please chk and change port.
Rgds Ernie. -----Original Message----- From: Murray Greenman <[email protected]> To: [email protected]; [email protected] Cc: [email protected] Sent: Thu, Jun 18, 2009 8:45 pm Subject: [time-nuts] Lady Heather question John/Mark, I don't own a Thunderbolt, but I do have a very nice Trimble NTGS50AA GPSDO which works very well, and it also operates very nicely with TBOLTMON, in both TSIP and SCPI modes. However, I've just fired up Lady Heather V2.0 for the first time, and although the program starts, nothing happens. I have a graph graticule at the bottom, and a blank black area above with just a few things written on it, such as the graph legend. No sign of the wealth of data shown in the help file screen shot, nor any graph data, even after waiting quite a while. I tried both the Win version and the DOS version, and they behave the same. My test computer is an old IBM Aptiva with 450MHz 586 processor, running Win XP. I use COM2 and the program seems happy with that, and everything works fine with TBOLTMON. My next step is to drag out a laptop and spy on the comms between the computer and GPSDO to see what's going on (if anything). I know this is a big ask, but any suggestions as to what might be happening? 73, Murray ZL1BPU _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
