Yes, the 103A is the Frequency Comparator; the 203A is the Distribution Amp. Sorry for the mistake. The 103A manual price as listed, is $25 plus shipping. I received confirmation this morning that is indeed the Montronics Frequency Comparator manual with schematics, so I ordered it immediately (http://www.manualsplus.com). Don't know how many they have in stock.

Dave M
masondg44 at comcast dot net


From: "phil" <[email protected]>
Subject: Re: [time-nuts] Need sevice manual or schematics for Fluke 103A
To: "Discussion of precise time and frequency measurement"

The Fluke 203A is the 1 MHz Distribution Amplifier
What's the 103A manual worth ?

----- Original Message ----- From: "Dave M" <[email protected]>
To: <[email protected]>
Sent: Wednesday, July 15, 2009 10:39 PM
Subject: Re: [time-nuts] Need sevice manual or schematics for Fluke 103A


Thanks for that, Phil. I have located a listing for a Fluke 203A manual,
but don't know yet if it's for the Fluke/Montronics Frequency Comparator
or something else from Fluke before they acquired Montronics. Waiting for
a reply from the vendor.  If it's the right manual, I'll buy it rather
than bothering with scanning/copying.
I have not isolated the trouble.. without so much as a block diagram of
the innards, it's a bit difficult to get much figured out without making
it a summer-long project. The trouble is that the front panel phase meter
and the phase output jump around quite a bit, even when feeding the same
source into both inputs.  It's like it can't figure out which frequencies
to mix for the comparison.

In a different vein, I also have a Fluke/Montronics model 203A
Distribution Amp.that I'd like to get into.  It's set up for 100KHz, 1MHz
and 5MHz channels; all non-isolated.  I'd like to see the schematics for
the preamps and output amps so that perhaps I could modify the 100KHz or
5MHz channel to be a 10MHz channel, and provide isolation as well.   Can
anyone help with the schematics for the 203A DA?

Thanks again, Phil; I'll be in touch if the manual turns out to be the
wrong one.

Dave M
masondg44 at comcast dot net



_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to