Hello, Time Nuts-- My thanks to those couple of you who have sent screen captures of your LH 3.0 beta display to "eddikate" me. Any other screen captures pending will be most welcome. Part of my quest in this is to see how others have configured their displays so as to display the most information but not have the display so cluttered with overlaid graphs as to be unreadable. My "computer-fu" is not very strong and it helps to have other people's examples to compare to what I see!
My first stumbling attempts to set LH 3.0 beta up have brought up a couple of questions, one of which is why, after commanding it to do a 4 hour fix, it came up with a Lat and Lon reading that is very much in error? After the precision fix the Lat/Lon/Alt reads: Lat 47.xxxxx N Lon 122.xxxxxx W Alt -9.xxx M However, my actual Florida/USA location is: Lat 29 N Lon 82 W Alt 27m AMSL. What am I doing wrong to wind up with this wrong Lat/Lon ?? As for tips for configuring LH 3.0 beta, Mark's suggestion to set the signal level mask to a low value (like AMU=1.0) and the satellite elevation mask to a high value (like 25 degrees) is much appreciated. My antenna location (on top of the fireplace chimney cap 6 feet above the house roof) is surrounded by tall trees and most of the sky below 20 degrees is blocked by foliage. Mike Baker --------------------- _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
