Weekend Update. As of this evening, the voltage on pin 4 is -0.811 VDC and the HV is 2313 VDC.
The progress has been start and stop but a steady trend in the right direction. The voltage on pin 4 (that needs to get to 4 VDC in order to turn on the CS Oven) has remained relatively stable at -0.253 VDC. It was -0.263 on the morning of the 19th. Any predictions as to whether this will come on line without going to a higher voltage/higher current supply? Rather than building an HV power supply this weekend, I spent the entire weekend cleaning up the work shop. I can now WALK in the shop. Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of J. L. Trantham Sent: Monday, January 18, 2010 8:41 AM To: 'Discussion of precise time and frequency measurement' Subject: Re: [time-nuts] 4 KV Power Supply Recommendations This morning, -0.995 VDC and 2181 VDC. Progress! Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of J. L. Trantham Sent: Sunday, January 17, 2010 9:14 PM To: 'Discussion of precise time and frequency measurement' Subject: Re: [time-nuts] 4 KV Power Supply Recommendations This evening, the voltage on pin 4 is -1.039 VDC and the HV is up to 2151 VDC. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
