Thunderbolt PRECISION GPS 10mhz Standard's LED Monitor
I received two from fluke.l 16 days after I sent my PayPal payment.
It was well-packaged and he fit both in one box to save me
shipping costs.
They came with a DB-9P already soldered on the cable and a
typical DC power jack. He even included shells for the DB-9P.
They both powered up fine and started talking with my
Thunderbolts right away. Current drain is about 75 ma at
start-up and then falls to 50 ma (13.6 volts).
It's not Lady Heather, but I can monitor my TBolts at a glance
without tying up PCs.
Mike - AA8K
Arthur Dent wrote:
The display I got from fluke.l (ordered 12-4-09) ran on +5V but the one I got
from Amazon had a 3-terminal regulator and would run from 7-20V and was
designed for +12V. I just noticed Bob's Ebay listing has been changed to add
this note:
"because of some reasons,i change one IC on the PCB,
so the buyer whom bought the display unit after 2009.12.25 Please use the 9V for
the Power supply. 12v also OK."
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
