My fluke.l monitor stopped working today ...
Mine stopped yesterday
The monitor is a recent model and has the regulator.
So does mine and I run the board from a 9V regulator.
The display is built into the same box as the gpsdo
I left it on overnight,
Mine has been on continuously for over a month
The backlight is fine and the display works.
.... and occasionally gives garbled displays of other data.
.... alternating between ... some data or other every few minutes,
but the data doesn't appear to be accurate.......including question
marks in numeric fields,
Same thing here
Other errors that I get :
2 lines of date & time
Only one line of date & time on the display
It has frozen displaying only one line of date & time for several minutes
Sometimes displays "TSIP LED Monit"
Ocassionally only the back-light is on, nothing displayed
This lasts for a couple minutes then resumes "normal" display.
There seems to be a pattern developing. Is this an inherent problem
with the processor board or with the software? All together, mine has been in
operation about 3 months which would seem to rule out a software problem.
The occasional display of "TSIP LED Monit" would indicate that the processor
is being reset as this is normally seen at power-up.
Maury
W5UGQ
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
