Thanks. That is more than I had seen before.
Looks like they basically talk NMEA. Maybe one day I'll look into this.
For my Z3816, I made a PIC-based LCD display for time and status. It
tapped into the serial stream from the Oncore GPS receiver inside the
box. Looks like the same could be done here, but with completely
different parsing.
Steve Rooke wrote:
Hi Rex,
On 25 May 2010 08:32, Rex <[email protected]> wrote:
Steve,
If the Furuno pdf's , you have, are more than just the sales fluff, I'd
suggest you upload the files to Didier's web pages
http://www.ko4bb.com/cgi-bin/manuals.pl?dir=05%29_GPS_Timing
That page has an upload link in the upper-right corner.
I don't think I have ever seen more than just a simple spec sheet on the
Furuno receiver.
I've uploaded the hardware and protocol specs for the GT8031 which was
the best that could be obtained from Furuno to date. These are fully
detailed and I expect the protocol spec is pretty close if not the
same as for the GT80. So far I have only tried a couple of the simple
commands, not wanting to screw things up in my Z3805A.
Steve
Steve Rooke wrote:
Bob,
On 24 May 2010 03:40, Robert Benward <[email protected]> wrote:
Hi All,
Does anyone have a manual for this Z3805A? Schematics?
If you find one, I'd certainly be interested. What I do have is some
pdfs on the Furuno GT80 receiver which is used in the device. These
were kindly sent me by Craig Miller and I can PM them directly to you
if you wish, just let me know.
Cheers,
Steve
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
