Check the on-board battery. It may not be up to spec. Good luck on changing it ... True-Time could not have made it more difficult.
73, Dick, W1KSZ -----Original Message----- >From: [email protected] >Sent: Jun 28, 2010 4:43 AM >To: [email protected] >Subject: Re: [time-nuts] Datum TS-2100 firmware updating > > >HI Julien, > >Do you have a detailed info, docu about the TrueTime XL-DC?????? > >I have 2ea of this unit and one is not going to lock....... >Any experience or help appreciated. > >Rgds Ernie. > > > > > > > >-----Original Message----- >From: Julien Goodwin <[email protected]> >To: [email protected] >Sent: Mon, Jun 28, 2010 1:36 pm >Subject: [time-nuts] Datum TS-2100 firmware updating > > >As a first post I thought I'd share a success story. >After a lot of flailing about the magic combination to upgrade a TS-2100 >rom old/ROM firmware appears to be to ensure the line endings on the >ile match that of the TFTP host. While it is twitchy about ethernet as >ong as there's no contention it's probably fine. >Serial updates I just couldn't make work. >Up next is to convert the darn thing to Rubidium, like it was meant to >e when I purchased it (insert rant here). >Other toys are a TrueTime XL-DC and Trimble Palisade, along with a >rueTime IRIG-B display. >Thanks, >ulien >_______________________________________________ >ime-nuts mailing list -- [email protected] >o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >nd follow the instructions there. > >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
