Fleming-- Many thanks! While waiting for a backup to complete, I dug out the traditional box of unsorted hardware each of us probably has. Rummaging through the box turned up four very pretty torx-headed stainless screws the proper size and length. They're not quite captive in the new mount, but the gasket holds them in place. I'm going to dig through the box for more; I'd rather have extras in my kit when I'm up on the roof, as one is certain to try and escape on me!
For those looking for the answer later on, the 58532A GPS antenna uses M4 x 0.7 screws. Didier -- I didn't spot that detail in the HP/Symmetricom manuals available on the net. They only show the assemblies. 73 de Bob K6RTM in Silicon Valley ------------------------------ Message: 3 Date: Thu, 19 Aug 2010 02:07:30 +0000 (GMT) From: Flemming Larsen <[email protected]> Subject: Re: [time-nuts] Mounting hardware for HP/Symmetricom 58532A GPS antenna? To: [email protected], Discussion of precise time and frequency measurement <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset=iso-8859-1 M4 x 0.7 ? -- FL --- Den ons 18/8/10 skrev Didier Juges <[email protected]>: Fra: Didier Juges <[email protected]> Emne: Re: [time-nuts] Mounting hardware for HP/Symmetricom 58532A GPS antenna? Til: "Time-Nuts" <[email protected]> Dato: onsdag 18. august 2010 17.36 You may want to chec the manual, it's on my web site. Didier KO4BB www.ko4bb.com _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
