Hi Be careful there, MQX is a "very much alive" product over at Freescale....
(and yes I suspect I do have a copy of OS-9 somewhere, I have no hardware that will run it, but probably do have the disks) Bob On Nov 10, 2010, at 1:21 AM, Greg Dowd wrote: > Since I either owned or created all the Bancomm/Datum ntp designs after > I joined bancomm in 1992, I can promise you that I still have at least > one version of the source code :-) Actually I think I even have the > source for the bc635/700LAN product, created by Joe Fontes. The problem > is generally that you can't recreate the build environments to go with > it and they were custom systems with custom bsps. Remember os/9 and/or > MQX? Our DR-DOS based TS2000 built with ampro modules MIGHT be easier > to get into. It was a DoC emulation. Since we don't sell, and probably > don't even support, those products anymore, I am happy to help as I can > but I don't know if there is enough interest for me to grind my way past > legal to release code which you could read but not use to reprogram > anything. > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of [email protected] > Sent: Tuesday, October 26, 2010 11:24 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Maintaining boatanchors > > I work with a guy who worked there for years as a CE. He still has > contacts; it's a real long shot, but I'll give it a shot. > > > -Dave > ----- Original Message ----- > From: "Jason Rabel" <[email protected]> > To: [email protected] > Sent: Monday, October 25, 2010 12:06:10 PM > Subject: Re: [time-nuts] Maintaining boatanchors > > I wish Symmetricom would release source to the old TrueTime / Datum > products... But I'm sure most of that source code has been lost > / thrown away. > > For instance, the older network time servers are much cooler to me than > the new models. The old stuff was custom designed and > specifically written / tweaked by hand. The newer time servers are just > off-the-shelf single board computers, a GPS module, and then > *maybe* a custom oscillator module.... Then they just run on a *nix OS > with some small custom scripts to do the timing and automate > setup... Just not the same... > >> HP had a program called NOMAS (Not Manufacturer Supported) where >> they did release the source code to some of their calculator products > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
