> > On 01/22/2011 11:31 PM, paul swed wrote: > > Well pretty interesting late afternoon. > > The oscillator works but C-11 definitely is troubled. Additionally a key > > element is an effective ground. Bridge the low side of the ampule to a > > better ground and the oscillator seems to reliably start. > Ignition occurs > > when the oscillator is in the 80-85 MC range. It can tune from > 65 to 130 MC. > > Interesting. I tuned for maximum amplitude. Seemed to work well enough.
I've tried peaking a couple of different LPRO-101s for maximum lamp voltage, and in both cases I found that while it was possible to achieve more lamp voltage, the short-term stability ended up being a bit worse. I need to do some more experiments when I have more time, but my preliminary observation is that peaking the trimmer for maximum output is not necessarily the best strategy. Hard to say for sure with n=2, though. -- john, KE5FX _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.