A while ago, I took a pair of watches (a Bulova and a Seiko) that needed new batteries to a fancy jewelry store here in town (VanDeGriff) because I thought they would do a good job.
The Bulova took 6 weeks... (They apparently did not service anything locally and had to sent it out). They said they had to replace the movement, which I did not know needed replacement. I asked them to return the bad movement with the watch, but I never got it. They broke the crystal on the Seiko and replaced it with a different one, which I made them replace again (good thing that I took very sharp digital pictures of the watches before I turned them over to the store). They did not charge me for the crystal on the Seiko (they broke it), but that one took 3 months and cost $25 ($10 for the battery and $15 for shipping both ways to the repair shop). I paid well over $100 for the Bulova. Since then, I bought a set of tools to safely open the back of most of my watches. For those I do not want to do myself, I take them to a small shop in the local mall that replaces the battery while you wait and you can see the guy while he does it. I have not had problem with him whatsoever, and he charges $7. He does not do pressure checks. I have returned watches directly to Seiko in the US (Coserv) for movement or crystal replacement. A new movement costs about $90 and a crystal costs about $15. They do a good job (as far as doing what you ask them to do), but they apparently do not routinely replace the o-ring or do pressure check because the watches I got back from them all took moisture... Next time I send one, I will specifically ask for new o-rings and pressure check. I have also returned a Citizen to Citizen US because the number 12 had come unglued from the face. They also did an excellent job for little money. YMMV Didier KO4BB Sent from my Verizon Wireless BlackBerry -----Original Message----- From: Chris Albertson <[email protected]> Sender: [email protected] Date: Tue, 15 Feb 2011 11:53:27 To: Discussion of precise time and frequency measurement<[email protected]>; W1LE<[email protected]> Reply-To: Discussion of precise time and frequency measurement <[email protected]> Subject: Re: [time-nuts] Tool Needed to Access my Timer Battery Almost any place that sells quality watches will replace the battery for you for about the price of the battery. It takes about 5 minutes and they will have the tools and battery You should get most of your $10 bill back as change Typically there are two types of rear covers some are threaded and others use a snap/friction fit. Battery and o-rings are not designed special for each model of watch and are standard parts -- ===== Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
