Thank so much for taking the time to do this, it's genuinely much
appreciated
My replacement fet for the lamp assembly is on it's way from China and
I'll report back how I get on with the repair
73
Brendan
My
On 23/02/2011 15:29, Robert Watson wrote:
OK, Here is the result of my lunch-break scanning session. I had to
use a desktop A4 sized scanner so you might need scissors and tape to
make sense. The 17x11 sheets are split onto overlapping two letter
sized pages (Rb lamp driver is on last couple of pages). Don't have
time to tidy it at this stage.
Usual caveats: link may not be around forever so if someone wants to
find a better home for it, do so. For personal use only etc.
http://people.bath.ac.uk/eesrjw/prs10/PRS10_revH_BoM_schematics.pdf
Regards,
R.
On 23 February 2011 09:04, Robert Watson
<[email protected]> wrote:
Hi folks,
OK, have found the manual and it's not as bad as I remembered; there
are six 17"x11" fold out sheets. The schematics are dated August 12th
1999 and are for "Revsion H". I'll scan the schematics and the parts
list in case that helps folks with non rev. H units. There are no
copies of the silkscreens for component ident as near as I can see.
Will see if I can scan these in the next couple of days.
R.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
--
73
Brendan EI6IZ
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
