On Fri, Mar 16, 2012 at 7:30 PM, Sam Reaves <sam.rea...@gmail.com> wrote:
> Hello all, > > I have a couple of these supplies that I plan to use with the TBolt. From > what I can gather > > from searches on the internet the RO pin between the two grounds on the > power connector is a remote turn on > which is enabled by grounding this pin. > I cut the connector off mine. So I don't know the location of the pins. I was kind of afraid to simply ground a power supply lead so I used a low value resistor. You might try that so as to prevent damage if you guess wrong about which wire to ground. 100R or 50R are good values to use > > Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
