Hi That all looks very normal. LH can scale the graph on it's own. I *know* that's true because it couldn't have been my typing on the keyboard that did it. That's my story and I'm sticking to it :)……
Your DAC voltage looks good and the oscillator seems to be settling well. I'd say you are running ok. I'd run coax for both the 1 pps and the 10 MHz. One pps jack should be plenty for now. If you run multiple jacks for the 10 MHz, rig up a simple resistive splitter. Bob On Jun 13, 2012, at 5:33 PM, Chris Wilson wrote: > > > 13/06/2012 22:27 > > About to do the permanent installation, if I bring two leads from the > 10 MHz and 1 PPS BNC sockets on the TB to a panel in my shck can i > have say 5 BNC sockets on the panel wired in parallel, with the lead > from the 10 MHz socket on the TB feeding them all? And a single socket > for the 1 PPS? Any need to screen the back of the socket panel, or > enclose it in a metal box? Cheers. > > Oh, I have been running lady Heather for a while tonight, here's a > screen capture, does it look OK, ther's suddenly just two traces > appeared? Thanks. http://www.chriswilson.tv/heather.png > > -- > Best Regards, > Chris Wilson. > mailto: [email protected] > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
