Corby Thanks for the key part what to do when you need to fix the issue. Regards Paul WB8TSL
On Sun, Oct 28, 2012 at 11:50 AM, <[email protected]> wrote: > After the degauss you should recheck the Zeeman setting, which you did. > > You also verified the synthesizer frequency is set to the frequency that > requires a C-field current high enough to reach 53.53. > > Since it is running at 48.21 you should increase the C-field setting > until the central peak moves to 53.53. > > This is assuming that your unit has the resistor installed for 53.53. > > If not you will reach the end of the C-field pot before getting to 53.53! > > In that case you need to put a decade box (set to max resistance) across > the C-field resistor and with the C-field set to 500 reduce the > resistance until the central peak gets to 53.53. > > Then solder in a 1% fixed resistor (closest value to the decade box > reading) across the C-field resistor. > > Now recheck and you will be able to use the C-field pot to reach exactly > 53.53. > > Cheers! > > Corby Dawson > ____________________________________________________________ > Woman is 53 But Looks 25 > Mom reveals 1 simple wrinkle trick that has angered doctors... > http://thirdpartyoffers.juno.com/TGL3141/508d54a2aac4554a26ff4st02duc > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
