Hi All,
I use a Z3801A with a software program called GPS Control published by BDS
Systems of Colorado and the setup works well but I have never been able to
look at or control the 3801A using Tac32.
Very recently Tac32 was upgraded to allow one to choose most of the GPS
receiver communications parameters but even with this I can not achieve any
data. GPS Control is set as :
Baud Rate 19200
Parity ODD
Data bits 7
Stop bits 1
Handshake NONE
Please someone help me with suggestions as to what protocol the 3801A
outputs and whether it is possible to use Tac32 successfully using the same
communication paramaters as for the BDS software?
Thanks - Merv VK6BMT
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
