We are working on a documentation package and it will the thanks to Didier on his site. At this time three items are available and tested. A basic dual mixer based on the original NBS paper with modifications, a 2 channel counter and a 4 channel counter. Juerg is working on a LCD display that has also additional features. Its goal and status will be described in the documentation. Timing will be a function of the volunteers that help with drawings. The counters have not been tested with Timelab but Stable 32 and Ulrich's software. No reason it should not work with Timelab. The W.J.Riley D/M will also work with the counters and I am looking at the possibility to take the best from many sources to come up with a noise floor of 1 E-14 at 1 Hz. But let us not loose sight of the fact that most of us will never be able to use that kind of performance and to me the priorities are Affordability KISS "Keep it simple stupid" Ability to assemble: as few as possible SMD's User friendly, flexible and be used for all A/V but also frequency and aging measurements. Bert Kehren In a message dated 11/23/2012 4:38:32 A.M. Eastern Standard Time, [email protected] writes:
Hi all, I would like to know some more about this project's status and cosistency. This seems to be the "total solution" to ours exspectation about Adev measurements. The question I have are: What is the project plan about the paper production to describe or/and sell the HW? Is the project a complete dual mixer + TIC ? What about the SW? may I use the Timelab to have a strip chart like Adev? If not what SW I can use? thanks, Luciano timeok _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
