I am not convinced the temperature control in mine is functional. For example,
the temperature target seems to not do anything at all. With the box insulated
the internal temperature is around 46 C and nothing changes if I set that number
to 40 or 50 C, it is still around that 46 plus or minus 1 or 2 C as the
environment changes.
What do you mean by having your fan steered by the LH temperature controller?
As for the optimization, I can't find that key combination. Is there anywhere a
COMPLETE listing of all the key functions for the program?
Peter
On 3/8/2013 2:57 AM, Achim Vollhardt wrote:
Peter,
I did let the internal algorithm make it's optimization (can't remembere which
key sequence it was) once everything has settled. The lab here has 2-3 degC
ambient variations over the day, but putting the Thunderbolt in a box which is
ventilated (well.. fan-ed) by the LH temperature controller in a steered way,
the temperature variations are down to single clicks of the
Thunderbolt-internal thermometer reading (which appear to be 6 mK).
Achim
Achim,
Did you change any temperature controller settings from default values? I am
seeing about a 10:1 correspondence between ambient changes and internal reported
temperature movement.
Peter
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1430 / Virus Database: 2641/5654 - Release Date: 03/07/13
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
