-----Original Message-----
From: Paul
Sure. I think my point is that I've seen this problem on both of my
units when powered by both a 5V2A wall adapter supply and a 5V.8A
supply. Since the problem has been reported by other people it's
sufficient for me to look to other solutions that don't have this
(admittedly minor) possibly configuration related flaw. Besides I got
them to run NTP and they're too jittery for my taste.
===========================
Paul,
Just what devices were you hot-plugging to produce this problem? One with
an initial current surge outside the USB spec I could understand.
NTP performance on the three Raspberry Pi cards here can be of the same
order as FreeBSD running on an Intel Atom PC:
http://www.satsignal.eu/mrtg/performance_ntp.php
The RPi cards are all using very low cost GPS/PPS receivers with no external
antenna, and the FreeBSD box has an external roof-mounted GPS 18 LVC.
Cheers,
David
--
SatSignal Software - Quality software written to your requirements
Web: http://www.satsignal.eu
Email: [email protected]
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
