Dear group: I'm building a little Arduino project that is HP Z38xx's LCD monitor, I use a Arduino Duemilanove board and a 12864 LCD screen to display running infomation of Z38xx, but when I almost finish my program, I found my Z3801A changed serial port output mode, it send a command echo before useful message, like as:
if I sent " ROSC:STAT?" At first it will return "LOCK CR/LF SCPI>", I used few code to cut sub-string before CR/LF, it works well; But now it return " ROSC:STAT? 0x0D 0x0A LOCK 0x0D 0x0A SCPI>", it added a ECHO message (same with which command the Arduiono sent to it) in ASCII message head. I used a PC and Hyper Terminal to monitor my Z3801A, it gave me same output. I didn't recall how it change its output mode, but point is how to turn off this ECHO mode? Thanks a lot. Hui Zhang _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.