> Message: 1 > Date: Fri, 03 Jan 2014 17:10:33 +1100 > From: Graeme Zimmer <[email protected]> > To: Discussion of precise time and frequency measurement > <[email protected]> > Subject: [time-nuts] Trimble: Using RS-232 via with USB adapter > Message-ID: <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi folks, > > This has probably been covered before, but I thought it worth knowing.... > > I wanted to use my new laptop with my Trimble/Nortel GSP receiver. > As my laptop doesn't have an RS-232 port, I purchased a cheap USB to > RS-232 adaptor. > > After a few false starts I found that the older Tboltmon software runs > quite happily via the adaptor. > > A pleasant surprise however was that the newer USB based TrimbleStudio > also runs. > The TrimbleStudio has a few nice additions over the older software. > > > regards ............. Zim
Zim, thanks for posting this because somehow I missed the arrival of TrimbleStudio...what the heck, this thing rocks! Russ _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
