Where those using the cat-5 wire as a twisted pair? If sothat's "cheating" I was truing to send an RS232 signal down a cat 5 cable. That means Tx, Rx Gnd and DCD. You need four wires for that, ethernet uses the other two pair. I was using the pairs Ethernet does not use.
The solution was to just not do it. I swapped out the entire system so that now the computer is a $20 ARM based NAS that I re-flashed moved physically close. > Here are scope pictures from the PPS signal from a TBolt driving 100 feet > of > various types of wire: > http://www.megapathdsl.net/~hmurray/time-nuts/coax/Coax-20ns.png > http://www.megapathdsl.net/~hmurray/time-nuts/coax/TP-20ns.png > The clump on the left of each graph is the input. The stuff on the right > is > the output. The scatter is due to the different prop times. > > -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
