Mathias OK I see that I need a different board then. Let me take a look. I think thats the $12 board
On Tue, Jan 14, 2014 at 6:14 AM, Matthias Koch < matthias.k...@hot.uni-hannover.de> wrote: > Dear Paul, > > thank you ! Instructions are included in the source package, you will need > a signal of about 1.5V DC and 0.5V amplitude. The analog-digital converters > are single ended and accept voltage levels between GND and Vcc which is > about 3V. > > You can enjoy my native code Forth compiler on the MSP430 Launchpads, too, > and try Ledcomm, but for Loran-C you need a STM32F407 Discovery board which > has enough RAM for circular GRI buffer. > > I would be glad if you could sample signals with your Loran-C simulator to > check if it is running fine. > > Matthias > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.