> Is this possible to do, and if so, can anyone give me some clues as to how?
ntpd works fine with Thunderbolts. It's the Palisade driver, 29. If that's not enough of a hint I'll say more. ntpd basically sends a few setup commands to put the TBolt into a mode where it sends packet types X and Y every second, and then just listens to those packets. (I forget the values of X and Y. If you need to know and can't find them in the source code, I'll look for them.) If you have two PCs, you might try making a RS-232 splitter cable. Put ntpd on the listen only side. If LH sets things up right, ntpd will hear the stuff it wants and ignore the other stuff that LH uses. If ntpd does anything too stupid (like flood the log file), let me know and I'll try to fix it. You might be able to avoid the second PC by using a USB-serial gizmo. For good timing, you need to hack the TBolt to put the PPS on pin ?? and connect that to the real serial port. The TBolt pulse may not be wide enough. -- These are my opinions. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
