Hi Azelio, What I have available to me is a time-stamped, per second, file of DAC values and wrapped phase error (as compared to 1PPS) values. Is there anything I can do with that? It's not quite a frequency loop and it's not quite a phase loop. I figured with a starting point I could learn something about an ADEV and how it applies to my GPSDO.
Bob >________________________________ > From: Azelio Boriani <[email protected]> >To: Bob Stewart <[email protected]>; Discussion of precise time and frequency >measurement <[email protected]> >Sent: Sunday, February 2, 2014 6:24 PM >Subject: Re: [time-nuts] Sample "R" script for ADEV under Linux wanted > > >I suggest to use the TVB's >http://www.leapsecond.com/tools/adev1.c >C source and derive your script from it... but first, your GPSDO has >to put out the time interval error samples or you have a reference and >a TIC to measure your GPSDO (better this last setup). > >On Mon, Feb 3, 2014 at 1:02 AM, Bob Stewart <[email protected]> wrote: >> Subject says it all. Does anyone have a script I could use as a starting >> point to calculate/plot the ADEV for my GPSDO? >> >> Bob - AE6RV >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
