Le 4 févr. 2014 à 22:35, Volker Esper a écrit :
> http://www.ebay.de/itm/HP-58516A-GPS-1-4-signal-Distribution-Amplifier-Splitter-N-type-/300997787447?pt=US_Ham_Radio_Receivers&hash=item4614ddbf37
>
I think I should have said that my box is only 25mm high. So any splitter
will have to be less. A Mini Circuits splitter will just about do it , but I
would prefer a smaller solution.
>
>
> Am 04.02.2014 14:08, schrieb mike cook:
>> Hi,
>> Till now I have been putting receivers in individual boxes. So to limit the
>> growing number of boxes, I want to put two Resolution-T SMT receivers in one
>> box, sharing power and antenna inputs. My question is " How best can I share
>> the antenna input, minimizing any interference between the receivers?" .
>> Will any interference matter? For example, I can easily connect three bits
>> of shielded coax in a "Y" , but will probably get reflections from each
>> receiver. As the cables will only be about 15cm long, would it matter? How
>> about the DC antenna supply? The antenna DC will NOT be powering an antenna
>> as it passes through a DC blocked splitter used to share an antenna between
>> most of my receivers. I might be able squeeze a Mini-Circuits splitter in
>> the box and DC-block both outputs but that may be overkill. What discrete
>> circuitry might be a replacement? Will the "Y" do it?
>>
>> Someone must have already succeeded with this type of config.
>>
>> Thanks in advance for your input.
>>
>> Regards,
>> Mike
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts@febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.