Perry, you don't need 10kHz to build a GPS disciplined oscillator. GPSDOs are build with control loop response times in the range of some hours, so the loop will be absolutely happy with a 1PPS input.
To keep the frequency stable at short times, you need a very stable quartz oscillator instead, something like a TCXO. There are many aviable on the surplus market, for example http://www.ebay.de/itm/Vanguard-TCXO-0-1ppm-25-000MHz-Ultra-precision-Golden-Oscillator-/131020893918?pt=LH_DefaultDomain_0&hash=item1e81742ede or http://www.ebay.de/itm/HP-10811-60111-10-MHz-Quartz-Crystal-Oscillator-/321311911853?pt=LH_DefaultDomain_0&hash=item4acfaeafad Volker Am 08.02.2014 05:10, schrieb Perry Sandeen: > > List, > > > Wrote: where is a good source of GPS receiver modules I need one which has > 10kHz output to phase lock a quartz oscillator. > > > Fluke.1 Motorola ONCORE M12+T timing gps receiver > 1pps 100hz eBay item number:290656401551 > > > Also RDR > > There is another china seller that has them(10KHz) > with leads for $90 but is almost impossible to find. Last time I searched it > took me a hour. But he has a wide assortment. I forgot to bookmark > his site. > > Regards, > > Perrier > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
