Re Bob's comments- This article is relevant.
http://www.g4jnt.com/10MHz_Reference_Source_Stability.pdf
DaveB, NZ
----- Original Message -----
From: "Bob Camp" <[email protected]>
To: "Discussion of precise time and frequency measurement"
<[email protected]>
Sent: Sunday, February 09, 2014 5:22 AM
Subject: Re: [time-nuts] GPS W/10KHz
Hi
The 10 KHz that these modules put out is not very “clean” in terms of
driving a synthesizer. If you are looking at taking it straight to RF (as in
driving a VHF radio), you likely will be less than happy with the result.
Bob
On Feb 8, 2014, at 8:02 AM, Alex Pummer <[email protected]> wrote:
Thank you very much,
73
KJ6UHN
Alex
On 2/7/2014 8:10 PM, Perry Sandeen wrote:
List,
Wrote: where is a good source of GPS receiver modules I need one which
has 10kHz output to phase lock a quartz oscillator.
Fluke.1 Motorola ONCORE M12+T timing gps receiver
1pps 100hz eBay item number:290656401551
Also RDR
There is another china seller that has them(10KHz)
with leads for $90 but is almost impossible to find. Last time I
searched it took me a hour. But he has a wide assortment. I forgot to
bookmark
his site.
Regards,
Perrier
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
