On 13/03/14 22:11, Tom Van Baak (lab) wrote:
Do you have a photo? I have a large collection of hp oscillators here and do
not see a 10544 with SMB. Are you sure it's not 10811?
Then again, there are 10544A s/n 1528Axxxxx mounted on a 15-pin PCB
(05238-20027) which has a SMB connector.
That board is a quick and dirty carrier for 10544 or 10811 if you like
to just test-run them.
Cheers,
Magnus
/tvb (i5s)
On Mar 13, 2014, at 12:44 PM, Mark Kahrs <[email protected]> wrote:
Jerry Johnson has the following question:
"Some of the documents that I have found show pins and feed throughs
with SMB right angle connectors for RF and probably control voltage.
This one doesn't have the SMB connecgtor, just pins. The case says
10544A part number (which I've not yet searched on) 1528A06401 but
finding a used on probably won't find the internal information that
I would like to have."
Anyone seen this before?
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
