Hi Jim The PC containing my archives is busy and I can't pull any files off right now, sorry about that, but I've confirmed that the component level service data I have is the same February 2007 version as can be found here...... http://cp.literature.agilent.com/litweb/pdf/5989-6308EN.pdf Information regarding the pin usage is at the top left of page 20, Main Board schematic page 3 of 4, and the connection data from the expansion PCB is at the bottom right of the Channel 3 schematic on Page 8. That's all I was going on, I haven't checked any further what the effect might be of altering what the motherboard sees from those pins. Regards Nigel GM8PZR In a message dated 19/03/2014 01:13:31 GMT Standard Time, [email protected] writes:
Thanks everyone for the thoughts. Nigel, I am not seeing the references to pin 9 connected to +12 and 10 to ground on the documentation I have. Perhaps you could send along your component level service manual. Address is [email protected]. Many thanks. Jim N1JR _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
