Hi There have been multiple posts about analog TDC’s of various designs that get you into the sub 100 ps range without costing very much money. I believe the cheapest posted so far adds < 50 cents to a basic PIC based design.
Bob On Mar 25, 2014, at 7:38 PM, Jim Miller <[email protected]> wrote: > The lowest cost solution is to do the correct entirely in software. > After the measure the phase, simply add the correction. > > All you need to know is the phase. There is not point in correcting > the pulse, you don't need a corrected pulse. What you want is a > measurement of the phase. > > > Chris > > I'm baffled as to how one would do this in software without a ton of > expensive hardware to give phase information. Could you provide in words a > simple block diagram of where you would get phase information without a Ghz > TIC to read? > > Thanks > > Jim > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
