hi all,
as is my commentent to /tvb's question.
Hope it helps, Götz
Tom,
i've found 3 pdf Thunderbolt-Manuals identified as:
-V3 from 2000
-V3 from 2003 and
-V1 from 2012
Differences are in the Report Packet 0x8F-AC Data Format pp A62,A62 and 81.
If you compare, there are differences among
Byte 1 (Receiver Mode) Bits 5 and6,
Byte 13 (Disciplining Activity) Bits 8 and 9
Bytes 8,9 (Critical Alarms) Bits 1,2,3
Bytes 10,11 (Minor Alarms) Bits 9 and 11 (and yes, Bit 11 is set from my
Tbolt (Firmware V3.00) if I remember correctly). Use of Bit 10 (EEPROM
invalid) is not decribed. I have not it tested though :-)
A rather reliable reference are Messages from Thunderbolt Monitor V2.60.
regards Götz
Am 26.03.2014 15:05, :
but beware, no single document related to Thunderbolt from Trimbles
website is complete nor fully correct.
Can you give me an example of some TBolt command that is not in the TBolt
document?
As a reference you may use my code of a simple Tbolt-Monitor you will here:
http://www.romahn.info/tbolt2lcd/
regards Götz
Nice. Thanks for posting that.
Thanks,
/tvb
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
