Hi Anders, please contact me offline and I will send you a copy of the QEX article.
Rgds Ernie. -----Original Message----- From: Mike George <mgeo...@tuffmail.us> To: time-nuts <time-nuts@febo.com> Sent: Fri, Mar 28, 2014 7:43 pm Subject: Re: [time-nuts] Using GPS to Fine Tune a Rubidium Frequency Standard. Anders: I am a QEX subscriber and have that issue but I haven't built he circuit. The author referenced Brooks Shera as the basis for his work. He uses a Trimble Resolution T GPS for a PPS reference and an PRO-101 Rubidium oscillator for the 10MHz. is circuit divides the 10MHz output from Rb by 100 and ompares the phase of the 100kHz against the PPS. PIC16 MCU is the controller and uses the phase data to control n external DAC to drive the Rb frequency control pin. There were a couple of other time & frequency related articles in 2013 f you decide to get the CD. Mike On 3/21/2014 09:20, Anders Time wrote: Does anyone have a copy of the QEX 2013 november article(Bill Kaune) "Using GPS to Fine Tune a Rubidium Frequency Standard"? I´m really interested in this subject, but I can´t find this magazine in Sweden. I have contacted QEX, but it is very difficult to buy back-issues. Have any one built this frequency standard and can tell me more about the project? You can access the source code for the project here: http://www.arrl.org/files/file/QEX%20Binaries/2013/November_13/11x13_Kaune_PIC_Code.zip /Anders _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ ime-nuts mailing list -- time-nuts@febo.com o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts nd follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.