Will someone beside us use heat pipe. Would love to have an impendent input. What does it take to get a test going. Scott has done a lot of work, how about some one else step up to the plate. There are a lot of time nuts out there with the 5680A,many for the first time will have a very good reference and some of our experts with proper equipment can make a big difference. Bert Kehren In a message dated 6/28/2014 12:20:12 P.M. Eastern Daylight Time, [email protected] writes:
At 04:32 AM 6/28/2014, wb6bnq wrote: >monitoring process ? In other words have you traced out the >connections to see what is driving the pin you think is the temperature input ? No. I've only traced back from the ADC input to the voltage divider. >The next big question is have you monitored the frequency and its >stability, externally, to observe what effects are taking place when >you disable this input to the A/D ? I have not. >That sounds complicated and messy but may be easier than it >appears. An appropriate container would be: It does sound messy. I don't think I'm willing to dunk one of my units. -- newell N5TNL _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
